PLYWOOD DIPPING MACHINE

Dipping Machine are widely used in the all types of plywood industries for chemical coating on plywood, flush-door, ply, board (panel) through rubber rollers. Dipping machine is also known as plywood policing machine. In conventional method generally chemical coating on plywood, flush-door with the use of brush or cloth, in this method there are slow production and lining of different shades on plywood, doors always seen. This is the new generation chemical coating/ policing machine, this machine coating method is better than the conventional method. We manufacturing international standard level Dipping machine to increasing your chemical utilization, perfectly spread and coating, minimum chemical consumption and prevent wastages. Evenly our Dipping machine helps the plywood coating rigidly precise, because we using leading quality rubber rollers. Our machine simple in working and machine is fitted with 10 to 12 rubber rollers. Rubber rollers are fitted with double ball bearing brackets. we using advanced discovered technology on the scientific way with leading services because “Prevention is better than cure” Definitely these are small steps but, small steps are necessary to cover long routes…
We manufacturing Dipping machine in two models; SEC-CDM 12 Rubber rollers, SEC-CDM 12 Rubber Rollers fully automatic and other according to our customer’s requiremant.
WORKING OF MACHINE :- The Dipping machine works through Neoprene Rubber rollers, Heavy duty gear box and pump, Temperature meter, Heavy duty chemical tank, Heavy gauge, Remote control board, Electrical starter or panel and also whipper.

MACHINE’S FEATURES:

•  Heavy duty m.s. fabricated frame and body
•  Easy to operate and used friendly
•  Smoothly running
•  Vibration less
•  Much chemical saving
•  Low maintenance
•  Leading quality
•  Leading services
•  Reducing labor & labor cost
•  Increasing production
•  Market competitive price

TECHNICAL SPECIFICATIONS:

•  Body and Base Frame of Machine heavy duty M.S. sheet
•  Chemical tank heavy duty M.S. sheet
•  Gear box heavy duty : 2 no. 3″ center
•  Branded Power Motors : 2 no. 3 hp
•  No. of Rubber rollers : 12
•  Fitter are fitted in machine for filter the chemical
•  Steam coil : One no. steam coil for heating chemical
•  One number 1 hp Pump for chemical lift from tank to on rollers
•  Guiders are both sides fitted for straight movement of plywood, flush-door, ply, board (panel)

                                         

                                                                              SHARP ENGINEERING COMPANY

Radour Road, Near Gurudwara,

                                                                                Purifarm,Jorian,Yamunanagar,

Haryana, India - 135001

                                                                                9671199013,1732-203102

                                                                                http://sharpplywoodmachinery.com

Glue Spreader Machine | Applicator Machines

Glue Spreader Machine are widely used in the all types of plywood companies to spread the glue uniformly on the core veneer for making plywood. We manufacturing international standard level glue spreader machine to increasing your glue utilization, perfectly spread, minimum glue consumption and prevent wastages. Evenly our glue spreader machine helps the veneers stick rigidly precise, because we using leading quality rubber glue rollers. Our machine simple in working and machine is fitted with four rubber glue rollers. Rubber glue rollers are fitted with double ball bearing brackets. In our machine also has a stainless steel tray for excess amount of glue collection. Machine’s can easily maintenance, the rubber glue rollers are able to move forward and lift up by handle & cylinders. Easy operation, rubber glue rollers are adjustable according to customer’s need. Our glue spreader machine can be easily cleaned out from the rubber glue rollers and glue residual.
We manufacturing glue spreader machine in three models SEC-GSM 36″(1000mm), SEC-GSM 56″(1400mm), SEC-GSM 108″(2750mm). We also manufacturing glue spreader machine for decorative and shuttering plywood according to our customer’s requiremant.

1) GLUE SPREADER MACHINE : MODEL NO. SEC-GSM 36″(1000mm)

MACHINE’S FEATURES:

•  Heavy duty m.s. fabricated frame and body
•  Smoothly running
•  Vibration less
•  Easy to operate and used friendly
•  Low maintenance
•  Leading quality
•  Leading services
•  Market competitive price

TECHNICAL SPECIFICATIONS:

•  Model No. SEC-GSM 36″(1000mm)
•  Working width : 950 mm
•  Max. gluing thickness : 80 mm
•  Diameter of spreading roller : 305 mm
•  Length of spreading roller : 990 mm
•  Number of spreading roller : 2
•  Diameter of lower feeding roller : 152 mm
•  Length of lower feeding roller : 990 mm
•  Number of lower feeding roller : 2
•  Power motor : 3 hp

---

2) GLUE SPREADER MACHINE : MODEL NO. SEC-GSM 56″(1400mm)

MACHINE’S FEATURES:

•  Heavy duty m.s. fabricated frame and body
•  Smoothly running
•  Vibration less
•  Easy to operate and used friendly
•  Low maintenance
•  Leading quality
•  Leading services
•  Market competitive price

TECHNICAL SPECIFICATIONS

•  Model No. SEC-GSM 56″(1400mm)
•  Working width : 1350 mm
•  Max. gluing thickness : 80 mm
•  Diameter of spreading roller : 305 mm
•  Length of spreading roller : 1370 mm
•  Number of spreading roller : 2
•  Diameter of lower feeding roller : 152 mm
•  Length of lower feeding roller : 1370 mm
•  Number of lower feeding roller : 2
•  Power motor : 3 hp

---

3) GLUE SPREADER MACHINE : MODEL NO. SEC-GSM 108″(2750mm)

MACHINE’S FEATURES:

•  Heavy duty m.s. fabricated frame and body
•  Smoothly running
•  Vibration less
•  Easy to operate and used friendly
•  Low maintenance
•  Leading quality
•  Leading services
•  Market competitive price

TECHNICAL SPECIFICATIONS:

•  Model No. SEC-GSM 108″(2750mm)
•  Working width : 2700 mm
•  Diameter of spreading roller : 430 mm
•  Length of spreading roller : 2720 mm
•  Number of spreading roller : 2
•  Diameter of lower hard chromed feeding roller : 300 mm
•  Length of lower hard chromed feeding roller : 2720 mm
•  Number of lower hard chromed feeding roller : 2
•  Power motor : 10 hp

                                                             

                                                                              SHARP ENGINEERING COMPANY

Radour Road, Near Gurudwara,

                                                                                Purifarm,Jorian,Yamunanagar,

Haryana, India - 135001

                                                                                9671199013,1732-203102

PEELING KNIFE GRINDER MACHINE

Automatic Peeling Knife Grinder Machine are widely used in the plywood and others small plywood, woodworking companies for grinding, re-grinding (sharping) of the log peeler machine’s knifes (blades) or veneer peeling lathe machine’s knife. There are 56″(1422mm), 72″(1830mm), 96″(2450mm), 108″(2750mm) grinder machines and other sizes according to our customer’s requirement. Extra heavy duty mild steel fabricated body of the machine. Slides of the machine are made from cast iron. Heavy duty cast iron Knife holder pressure vall for accurate working of the machine and fine quality sharping of blade. Heavy duty cast iron rotor for holding stone to fine grinding. In knife grinder machine cooling pump is used for preventing heat, because during the time of knife grinding heat is created between knife and grinding stone. The machine is fitted with superior quality branded electrical panel and electric motors.
we using advanced discovered technology on the scientific way with leading services because “Prevention is better than cure” Definitely these are small steps but, small steps are necessary to cover long routes…

MACHINE’S FEATURES:

•  Heavy duty m.s. fabricated body
•  Smoothly running
•  Accurate grinding
•  Vibration less
•  Easy to operate and used friendly
•  Heavy duty cooling pump
•  Clamping system
•  Markete Competitive price
•  Low friction b/w slide ways ensuring long life
•  Low maintenance
•  Leading quality
•  Leading services

TECHNICAL SPECIFICATIONS:

•  Motors : 5 hp + 1 hp
•  Water pump : 1 hp/ 0.5 hp
•  Gear box : Heavy Duty
•  M.S. body : Fully covered
•  Stone Rotor : Cast Iron Heavy Duty
•  Electrical panel : With limit switches
•  Models are available SEC-PKGM 56″(1422mm), SEC-PKGM 72″(1830mm), SEC-PKGM 96″(2450mm), SEC-PKGM 108″(2750mm) and other our customer’s requirement.
•  

                                                           

                                                                              SHARP ENGINEERING COMPANY

Radour Road, Near Gurudwara,

                                                                                Purifarm,Jorian,Yamunanagar,

Haryana, India - 135001

                                                                                9671199013,1732-203102

LOG DEBARKER MACHINE

Log Debarker Machine are used in the all types of plywood, small veneer making industries and other industries for log bark discharger, wood discharger. This machine is hydraulically operated and can work continuously in whole process. In conventional method log bark used to discharge by man power result low production and costly, so for prevent this problem we discovered new technology machine for discharge wood log bark. This is the new generation wood log debarking machine, this machine log debarker method is very better as compare to conventional method. We manufacturing international standard level wood Log Debarker machine to increasing your production capacity at smaller time without any man power. Our machine simple in working and machine is fitted with leading quality 3 rollers. we using advanced discovered technology on the scientific way with leading services because “Prevention is better than cure” Definitely these are small steps but, small steps are necessary to cover long routes…
We manufacturing wood Log Debarker machine in two models; SEC-LDM 56″(1400mm), SEC-LDM 108″(2750mm) and other also design according to our customer’s requirement such as working length & working diameter etc. 

1. LOG DEBARKER MACHINE : MODEL NO. SEC-LDM 56″(1400mm)

MACHINE’S FEATURES:-

•  Heavy duty m.s. fabricated body
•  Easy to operate and used friendly
•  Low vibration and noise
•  Low maintenance
•  Low failure rate
•  Leading quality
•  Leading services
•  Reducing labor & labor cost
•  Increasing production
•  Market competitive price

TECHNICAL SPECIFICATIONS:

•  Model no. SEC-LDM 56″(1400mm)
•  Body and Base Frame of the Machine heavy duty M.S. sheet
•  Branded Power Motors : 3 no. 10 hp, 7.5 hp, 5 hp for power pack
•  No. of rollers : 3 EN Material
•  Rollers length : 60″(1525mm)
•  Rollers diameter : 150mm
•  Maximum Working diameter : 15″(380mm)
•  Minimum working diameter : 3″(76mm)
•  Leading quality operating panel
•  Over all dimensions : 2286mm x 2286mm x 915mm

---

2. LOG DEBARKER MACHINE : MODEL NO. SEC-LDM 108″(2750mm)

MACHINE’S FEATURES:-

•  Heavy duty m.s. fabricated body
•  Easy to operate and used friendly
•  Low vibration and noise
•  Low maintenance
•  Low failure rate
•  Leading quality
•  Leading services
•  Reducing labor & labor cost
•  Increasing production
•  Market competitive price

TECHNICAL SPECIFICATIONS:

•  Model no. SEC-LDM 108″(2750mm)
•  Body and Base Frame of the Machine heavy duty M.S. sheet
•  Branded Power Motors : 3 no. 20 hp, 15 hp, 5 hp for power pack
•  No. of rollers : 3 EN Material
•  Rollers length : 116″(2950mm)
•  Rollers diameter : 230mm
•  Maximum Working diameter : 15″(380mm)
•  Minimum working diameter : 3″(76mm)
•  Leading quality Operating Panel
• Over all dimensions : 3800mm x 2440mm x 1220mm         
•             
•                
•  
•                 SHARP ENGINEERING COMPANY
  Radour Road, Near Gurudwara,
  Purifarm,Jorian,Yamunanagar,
  Haryana, India - 135001
  9671199013,1732-203102

SPINDLE LESS VENEER LOG PEELING LATHE MACHINE

The Spindle Less Log Peeler Lathe Machine are mainly used in the plywood companies for producing core veneer from the wood (log). For making plywood log peeler lathe machine is first step to manufacturing plywood. This machine are mainly used for smaller diameter wood (logs) to peel into core veneer. We manufacturing Spindle Less peeler lathe machines with the discovered engineered technology of international standard level. In this machine we uses special material press rollers instead chuck to fixing the wood (log). By this machine we can save the wood (log), core veneer and machine’s working rapidely, smoothly, accurately & safely as compare to conventional log peeler machines. Mostly this machine’s over all working are depends upon servo motors. In our machines have leading quality & leading accuracy machinery parts which gives you leading performance and high accuracy output core veneer, face veneer products. Our machines giving continuous ribbon of veneer of uniform thickness. We manufacturing following types of veneer peeling machines : Spindle Less Log peeler lathe machine 56″(1400mm), 53.14″(1350mm) and others according to customer’s requirement as well as machine’s working by CNC, NC, PLC, Automatically, Mannually systems & others according to customer’s requirement. Because we using advanced discovered technology on the scientific way “Prevention is better than cure” Definitely these are small steps but, small steps are necessary to cover long routes…

MACHINE’S FEATURES:

• Machine construction heavy duty.
• Accurate & high speed technology.
• Use friendly & easy to operate.
• Uses Pneumatic & hydraulic functions.
• Special design to suit core veneer production line.
• Suitable for plantation & Tropical wood species.
• More veneer recovery utility.
• Specially designed for veneer peeling medium.
• Super small diameter logs.
• Our machines accurate & vibration free.
• Our machines exact alignment, exact knife holding device.
• In machines check & test these preces & give you best performance.
• Corrosion resistant, Easy to handle, Durable, Reliable, High quality.

TECHNICAL SPECIFICATIONS:

• MODEL NO. SEC-SPL- 56″(1400)
• Maximum working length : 1400 MM
• Difference veneer thickness : 0.75 MM – 3.0 MM
• Minimum end core diameter : 30-40 MM
• Maximum working diameter : 360 MM
• Heavy duty m.s. fabrication body
• Hydraulically operated
• Total power required : 30 H.P.

Spindle Less Log Peeler Lathe Machine are available in different models and also manufacturing different sizes of working diameter, working length, veneer thickness spindle less peeler machines according to our customer’s requirement.


                                     

                            SHARP ENGINEERING COMPANY

Radour Road, Near Gurudwara,

Purifarm,Jorian,Yamunanagar,

Haryana, India - 135001

9671199013,1732-203102

LOG PEELING LATHE MACHINE

Log Peeling Lathe Machine are widely used in the plywood companies for producing Face veneer from the wood (log). For making plywood Log peeling lathe machine is second step to manufacturing plywood. We manufacturing Log peeling lathe machine with the discovered engineered technology of international standard level. In our machines have leading quality & leading accuracy machinery parts which gives you leading performance and high accuracy output face veneer, core veneer products. Our machines giving continuous ribbon of face veneer of uniform thickness. We manufacturing following types of Face veneer and core veneer peeling lathe machines : Mechanical veneer peeling lathe machine 108″(2750mm), core veneer peeling lathe machine 56″(1400mm), Hydraulic veneer peeling lathe machine 42″(1050mm), Spindleless veneer peeling lathe machine in each dimentional 1400mm & 2700mm and other type of machines according to customer’s requirements.

We also manufacturing hydraulic pneumatic veneer peeling lathe machine in CNC systems according to our customer’s requirement, because we using advanced discovered technology on the scientific way “Prevention is better than cure” Definitely these are small steps but, small steps are necessary to cover long routes…

  MACHINE’S FEATURES:

•  Machine construction extra heavy duty.
•  Accurate & high speed technology.
•  Use friendly & easy to operate.
•  Electrical control panel fully automatic.
•  The uses back-up Roll system.
•  Uses Pneumatic & hydraulic functions.
•  Special design to suit core veneer production line.
•  Suitable for plantation & Tropical wood species.
•  More veneer recovery utility.
•  Specially designed for veneer peeling medium.
•  Super small diameter logs.
•  Chucking with screw type motorised spindle.
•  Our machines well accurate & vibration free.
•  Our machines exact alignment,exact knife holding device.
•  In machines check & test these preces & give you best performance.

TECHNICAL SPECIFICATIONS:

•  MODEL – S.E.C. 2750
•  Knife stock length : 2750mm
•  Swing diameter : 1600mm
•  Maximum peelable diameter : 1600mm
•  Maximum log length : 2750mm
•  Minimum log length : 900mm
•  Minimum end core diameter : 70mm
•  Spindle diameter : 120mm
•  Maximum spindle rpm : 125
•  Veneer thickness : 0.25mm – 3.70mm
•  L & T Brand electrical panel
•  Heavy duty cast iron knife holder & pressure bar
•  Heavy duty m. s. iron fabrication body
•  All shafts/ spindles EN material
•  Hydraulically operated back-up rolls
•  Auto lubrication system through pumps
•  Hydraulically operated feed mechanism
•  Disc drive brake /clutch system
•  Air compressor
•  Power pack
•  Total power required : 75 h.p. with gear box

               

               
                SHARP ENGINEERING COMPANY

Radour Road, Near Gurudwara,

Purifarm,Jorian,Yamunanagar,

Haryana, India - 135001

9671199013,1732-203102

Rotary Face Veneer Peeling Lathe Machine

Rotary Type Face Veneer Peeler Lathe Machine are widely used in the plywood companies for producing Face veneer from the wood (log). Rotary Peeling Lathe machine is also known as Face veneer peeling lathe machine. For making plywood Rotary Type Veneer peeler lathe machine is second step to manufacturing plywood. We manufacturing Rotary peeling lathe machine with the discovered engineered technology of international standard level. In our machines have leading quality & leading accuracy machinery parts which gives you leading performance and high accuracy output face veneer, core veneer products. Our machines giving continuous ribbon of face veneer of uniform thickness.

We manufacturing following types of Face veneer and core veneer Rotary peeling lathe machines : Rotary peeling lathe machine 108″(2750mm), core veneer peeling lathe machine 56″(1400mm), Hydraulic veneer peeling lathe machine 42″(1050mm), Spindleless veneer peeling lathe machine in each dimentional 1400mm & 2700mm and other type of machines according to customer’s requirements. We also manufacturing hydraulic pneumatic veneer peeling lathe machine in CNC systems according to our customer’s requirement, because we using advanced discovered technology on the scientific way “Prevention is better than cure” Definitely these are small steps but, small steps are necessary to cover long routes..

  MACHINE’S FEATURES:

• Machine construction extra heavy duty.
• Accurate & high speed technology.
• Use friendly & easy to operate.
• Electrical control panel fully automatic.
• The uses back-up Roll system.
• Uses Pneumatic & hydraulic functions.
• Special design to suit core veneer production line.
• Suitable for plantation & Tropical wood species.
• More veneer recovery utility.
• Specially designed for veneer peeling medium.
• Super small diameter logs.
• Chucking with screw type motorised spindle.
• Our machines well accurate & vibration free.
• Our machines exact alignment,exact knife holding device.
• In machines check & test these preces & give you best performance.

TECHNICAL SPECIFICATIONS:

•  MODEL – S.E.C. 2750
•  Knife stock length : 2750mm
•  Swing diameter : 1600mm
•  Maximum peelable diameter : 1600mm
•  Maximum log length : 2750mm
•  Minimum log length : 900mm
•  Minimum end core diameter : 70mm
•  Spindle diameter : 120mm
•  Maximum spindle rpm : 125
•  Veneer thickness : 0.25mm – 3.70mm
•  L & T Brand electrical panel
•  Heavy duty cast iron knife holder & pressure bar
•  Heavy duty m. s. iron fabrication body
•  All shafts/ spindles EN material
•  Hydraulically operated back-up rolls
•  Auto lubrication system through pumps
•  Hydraulically operated feed mechanism
•  Disc drive brake /clutch system
•  Air compressor
•  Power pack
•  Total power required : 75 h.p. with gear box

                 

                SHARP ENGINEERING COMPANY

Radour Road, Near Gurudwara,

Purifarm,Jorian,Yamunanagar,

Haryana, India - 135001

9671199013,1732-203102

VENEER PEELING LATHE MACHINE & CUTTING MACHINES

Veneer Peeling Lathe Machine are mainly used in the plywood companies for producing veneer from the wood (log). For making plywood veneer peeling lathe machine is first step to manufacturing plywood. We manufacturing veneer peeling lathe machine with the discovered engineered technology of international standard level. In our machines have leading quality & leading accuracy machinery parts which gives you leading performance and high accuracy output core veneer, face veneer products. Our machines giving continuous ribbon of veneer of uniform thickness. We manufacturing following types of veneer peeling machines : Mechanical veneer peeling lathe machine 56″(1400mm), Face veneer peeling lathe machine 108″(2700mm), Hydraulic veneer peeling lathe machine 42″(1050mm), Spindleless veneer peeling lathe machine in both dimentional 1400mm & 2700mm machines.
We also manufacturing hydraulic pneumatic veneer peeling lathe machine in CNC systems according to our customer’s requirement, because we using advanced discovered technology on the scientific way “Prevention is better than cure” Definitely these are small steps but, small steps are necessary to cover long routes…

MACHINE’S FEATURES:

•  Machine construction extra heavy duty.
•  Accurate & high speed technology.
•  Use friendly & easy to operate.
•  Branded Electrical control panel fully automatic.
•  The uses back-up Roll system.
•  Uses Pneumatic & hydraulic functions.
•  Special design to suit core veneer production line.
•  Suitable for plantation & Tropical wood species.
•  More veneer recovery utility.
•  Specially designed for veneer peeling medium.
•  Super small diameter logs.
•  Chucking with screw type motorised spindle.
•  Our machines well accurate & vibration free.
•  Our machines exact alignment,exact knife holding device.
•  In machines check & test these preces & give you best performance.
•  Corrosion resistant, Easy to handle, Durable, Reliable, High quality.

TECHNICAL SPECIFICATIONS:

•  Model – S.E.C. 56″(1400)
•  Knife stock length : 1500 MM
•  Swing diameter : 800 MM
•  Difference veneer thickness : 0.75 MM – 3.50 MM
•  Minimum block length to be peeled :950 MM
•  Minimum end core diameter :30-40 MM
•  Maximum spindle revolution : 250 MM
•  Branded electrical panel
•  Heavy duty cast iron knife holder & pressure bar
•  Heavy duty m.s.iron fabrication body
•  All shafts/ spindles EN material
•  Hydraulically operated back up rolls
•  Hydraulically operated feed mechanism
•  Disc drive brake /clutch system
•  Air compressor
•  Power pack
•  Total power required : 45 h.p.
• 
  

                

                SHARP ENGINEERING COMPANY

Radour Road, Near Gurudwara,

Purifarm,Jorian,Yamunanagar,

Haryana, India - 135001

9671199013,1732-203102