PLYWOOD DIPPING MACHINE

Dipping Machine are widely used in the all types of plywood industries for chemical coating on plywood, flush-door, ply, board (panel) through rubber rollers. Dipping machine is also known as plywood policing machine. In conventional method generally chemical coating on plywood, flush-door with the use of brush or cloth, in this method there are slow production and lining of different shades on plywood, doors always seen. This is the new generation chemical coating/ policing machine, this machine coating method is better than the conventional method. We manufacturing international standard level Dipping machine to increasing your chemical utilization, perfectly spread and coating, minimum chemical consumption and prevent wastages. Evenly our Dipping machine helps the plywood coating rigidly precise, because we using leading quality rubber rollers. Our machine simple in working and machine is fitted with 10 to 12 rubber rollers. Rubber rollers are fitted with double ball bearing brackets. we using advanced discovered technology on the scientific way with leading services because “Prevention is better than cure” Definitely these are small steps but, small steps are necessary to cover long routes…
We manufacturing Dipping machine in two models; SEC-CDM 12 Rubber rollers, SEC-CDM 12 Rubber Rollers fully automatic and other according to our customer’s requiremant.
WORKING OF MACHINE :- The Dipping machine works through Neoprene Rubber rollers, Heavy duty gear box and pump, Temperature meter, Heavy duty chemical tank, Heavy gauge, Remote control board, Electrical starter or panel and also whipper.

MACHINE’S FEATURES:

•  Heavy duty m.s. fabricated frame and body
•  Easy to operate and used friendly
•  Smoothly running
•  Vibration less
•  Much chemical saving
•  Low maintenance
•  Leading quality
•  Leading services
•  Reducing labor & labor cost
•  Increasing production
•  Market competitive price

TECHNICAL SPECIFICATIONS:

•  Body and Base Frame of Machine heavy duty M.S. sheet
•  Chemical tank heavy duty M.S. sheet
•  Gear box heavy duty : 2 no. 3″ center
•  Branded Power Motors : 2 no. 3 hp
•  No. of Rubber rollers : 12
•  Fitter are fitted in machine for filter the chemical
•  Steam coil : One no. steam coil for heating chemical
•  One number 1 hp Pump for chemical lift from tank to on rollers
•  Guiders are both sides fitted for straight movement of plywood, flush-door, ply, board (panel)

                                         

                                                                              SHARP ENGINEERING COMPANY

Radour Road, Near Gurudwara,

                                                                                Purifarm,Jorian,Yamunanagar,

Haryana, India - 135001

                                                                                9671199013,1732-203102

                                                                                http://sharpplywoodmachinery.com